Please fill in all fields. We will send you an email when this product is in stock
We are unable to publish our current price for this item because it is below the minimum advertised price allowed by the manufacturer.
To get your instant price quote, pleae enter your email address in the field below and click Submit.
Passive VGA Wall Plate Extender up to 330ft over 1 x CAT5/6/7 Cable (RECEIVER ONLY).
The Atlona passive VGA wall plate receiver unit allows sending a perfect video signal over 1 x CAT5/6/7 cable up to the distance of 330ft with resolutions up to 1280x1024. These extenders can be mixed and matched with each other. The wall plate transmitter can be matched with “box receiver and the other way around and of course, the wall plate transmitter will perfectly work with wall plate receiver and “box transmitter with “box receiver.
Plug and Play, no drivers or software needed, user will not even notice the difference when using an extender versus a direct connection. The extenders require no external power.
Note: The AT-WPVGA-R is only a receiver unit, the transmitter is required (AT-WPVGA-S or AT-VGA100S)
The VGA Extenders are a great solution for many different applications, e.g., classroom, office environment, data-center, training room and many others where the computer must be placed further away from the users display.
Extend signals up to 330ft away from the computer on a single low-cost Cat5, 6 or 7 cables.
No power supplies are needed
Perfect for extending VGA signal further away than standard cables may allows.
Wall plate transmitter is compatible with “box receiver and other way around.
AT-WPVGA-R-b Atlona AT-WPVGA-R Passive VGA Wall Plate Extender (Open box without any defects) $79.99
Input: RJ45 female
Output: HD15 female
Supported Resolutions: 800x600, 1024x768, 1280x768 and 1280x1024
Transmission Distance: up to 330ft
Dimensions: Single Gang
Max. Distance via CAT5 Cable:
640x480 pixels (15MHz) – 430ft
800x600 pixels (30MHz) – 320ft
1024x768 pixels (60MHz) – 250ft
1280x1024 pixels (100MHz) – 200ft
AT-WPVGA-S Passive VGA Wall Plate Receiver
Wall plate Modules include white decora plate
The Atlona Extended Warranty covers parts and labor for up to 3 years of the date of purchase. In the event the product becomes defective or does not operate to its specifications Atlona will repair or replace the product. This warranty will be void if damage is caused by physical abuse, water damage, negligence, or any modification to the unit, as to the discretion of Atlona. The warranty will only be valid with the retention of certificate.
Atlona`s VGA (male to male) high-resolution video cable is a perfect solution for those who want to get the best possible picture quality out any VGA equipment. Cable is capable of transmitting either Computer or HDTV resolutions (up to WUXGA or 1080p).
The Atlona passive VGA transmitter unit allows sending a perfect video signal over 1 x CAT5/6/7 cable up to the distance of 330ft with resolutions up to 1280x1024. These extenders can be mixed and matched with each other.
The UV1-R-DP Mini-Cat receives Video and Phantom Power over UTP (Cat5/5e/6) cable up to 500 feet from a compatible Sender (UV1-S, UV1-S-WP, UV2-S, UV4-S, or UV8-S). It is constructed as a single gang Decora plate with a shallow depth so that it can mount into any size Junction Box. The UV1-R-DP Mini-Cat supports PC resolutions up to 1920 x 1440 or HDTV resolutions of 1080p.
Please fill in all fields. We will send you an email when this product in stock