Please fill in all fields. We will send you an email when this product is in stock
We are unable to publish our current price for this item because it is below the minimum advertised price allowed by the manufacturer.
To get your instant price quote, pleae enter your email address in the field below and click Submit.
Passive DVI Extenders Over single Cat5/6/7 (Transmitter and Receiver are included). Model: AT-DVI60SRS
The AT-DVI60SRS is a DVI Passive Extender kit that allows to extend high resolution DVI digital signals great distances. The DVI60SRS can transmit resolution such as 1920x1200 up to 160ft away or 1024x768 up to 180ft. With AT-DVI60SRS, users can send high quality digital video from DVI enabled PC/Laptop through single cost effective Cat5, Cat6 or Cat7 cable to the remote monitor or projector, instead of using short and expensive DVI cables.
The AT-DVI60SRS includes one transmitter and one receiver units. The transmitting unit is connected to your PC DVI output and the receiving unit is connected to the monitor or projector. The transmission distance between the transmitting and receiving units can be up to 50m (160ft) at resolutions up to 1920x1200 or 55m (180ft) at resolutions up to 1024x768. With compact size and requiring no power, AT-DVI60SRS is the most cost effective choice for bringing your impressive digital video to the remote display.
DVI 1.1 compliant
Extend the transmission length 50m (160ft) at resolutions up to 1920x1200 or 55m (180ft) at resolutions up to 1024x768
Easy to install
No power required (passive)
Capable of using CAT5/6/7 (568B Termination for optimal results)
Network Traffic LEDS (denotes active network traffic)
AT-DVI60SRS Passive DVI Extenders Over Cat5/6/7 (180ft) 249.99
AT-DVI60SRS Passive DVI Extenders Over Cat5/6/7 (180ft)(Open box without any defects) 249.99
Role of usage: Transmitter [TX] Receiver [RX]
DVI compliance: DVI 1.1
HDCP compliance: No
Video bandwidth Single-link: 165MHz [4.95Gbps]
Video support Up to WUXGA: [1920x1200@60Hz]
DVI over CAT5e transmission: 1920x1200@60Hz â€“ 50m [160ft]
1024x768@60Hz 55m [180ft]
Audio support: No audio for DVI signal
Input TMDS signal: 1.2 Volts [peak-to-peak]
Input DDC signal 5 Volts: [peak-to-peak, TTL] from DVI output
Input: 1 x DVI 1x RJ-45
Output: 1x RJ-45 1 x DVI
DVI connector: DVI-I [29-pin male digital only]
RJ-45 connector: WE/SS 8P8C with 2 LED indicators
1 x Transmitter Module 1 x Receiver Module 1 x Instructions Manual
The Atlona Extended Warranty covers parts and labor for up to 3 years of the date of purchase. In the event the product becomes defective or does not operate to its specifications Atlona will repair or replace the product. This warranty will be void if damage is caused by physical abuse, water damage, negligence, or any modification to the unit, as to the discretion of Atlona. The warranty will only be valid with the retention of certificate.
The DVI-FM500 Extender lets you extend your DVI source up to 5,000 feet away using a 100% fiber optic extension solution. Attractive and compact DVI-to-fiber modules connect to each other via just two LC fiber optic cable strands.
ADDERLink DV120 is an easy to install, highly compact video extender system that can transmit an HD video stream over a single CATx cable. This allows you to locate your media playback hardware in a secure and temperature controlled environment.
Please fill in all fields. We will send you an email when this product in stock