Please fill in all fields. We will send you an email when this product is in stock
We are unable to publish our current price for this item because it is below the minimum advertised price allowed by the manufacturer.
To get your instant price quote, pleae enter your email address in the field below and click Submit.
Atlona HDMI to VGA/Component + Stereo Audio Format Converter Model: AT-HD420
The Atlona AT-HD420 converts HDMI to a VGA or component output plus stereo audio. It enables an HDMI source to connect to a PC monitor, Projector or TV. Its high bandwidth capability supports a wide range of PC monitor and HDTV resolutions up to 1920 X 1200 or 1080p. The converter is also capable of de-embedding audio from the HDMI source and converting it to a stereo 1/8-inch interface. This will allow the user to connect it to a set of speakers, an AVR or any other audio device.
NOT HDCP Compatible
Supports HDMI input and VGA or component output.
Allows user to select between VGA or component video output interface.
Supports VGA VESA resolutions up to 1920x1200 or component video up to 1080p.
Embedded EDID will simplify the installation procedure. The HD420 will sync up with the source and let the source know to start outputting RGB or YPrPb format depending on the output selection and switch audio to stereo or PCM.
HDMI 1.3, HDCP 1.1 and DVI compliant.
DVI Compatible. You can use the HD420 with AT14040 for down converting DVI to VGA or DVI to Component video.
AT-HD420 HDMI to VGA/Component + Stereo Audio Format Converter $239.99
AT-HD420-b HDMI to VGA/Component + Stereo Audio Format Converter (Open box without any defects) $239.99
Inputs: 1 X HDMI (Type A Female)
Outputs: 1 X VGA (HD15 Female), 1 X 1/8 inch stereo audio (3.5mm)
Resolutions: up to 1080p and 1920 X 1200
NOT HDCP Compliant
Power Supply: 5V DC (universal 110/220V)
Dimensions: 2.99 (W) X 1.18 (D) X 3.62 (H) – (inch) and 76x30x92mm
Weight: 2 lbs
Operating Temperature Range: 32oF to +104oF (0oC to +40oC)
1 X AT-HD420 (HDMI to VGA or component video format converter) 1 X VGA to 3 RCA adaptor cable 1 X instruction manual 1 X Power Supply: 5V DC (universal 110/220V)
The Atlona Extended Warranty covers parts and labor for up to 3 years of the date of purchase. In the event the product becomes defective or does not operate to its specifications Atlona will repair or replace the product. This warranty will be void if damage is caused by physical abuse, water damage, negligence, or any modification to the unit, as to the discretion of Atlona. The warranty will only be valid with the retention of certificate.
The Atlona High Speed HDMI cables with Ethernet are unlike any cable you will find on the market. Supporting transfer rates beyond 10.2 Gbps at resolutions 4 times higher than standard 1080p (up to 4096 x 2160), this cable is designed to surpass all current standards of HDMI.
The SB-3691 is the professional 2x1 HDMI PiP PoP Select Switcher. Supporting (2) HDMI inputs and (1) HDMI output with Picture in Picture (PiP) and Picture of Picture (PoP) that can be easily configured and controlled.
Supports video resolution up to 1080p with a signal bandwidth of 165MHz, data rate up to 4.95Gbps, there is no signal degradation. The switcher is fully HDMI 1.3 and HDCP 1.2 compliant, with CE and FCC certification.
The Atlona AT-HD620 HDMI + Mini-DisplayPort (MDP) to MDP with Stereo Audio scaler and switcher box allows the user to extend the usage of their Mini DisplayPort monitor. This device can convert HDMI signals from any HDMI enabled source (BluRay, PS3, Xbox, Cable Box, TiVo and so on) to a Mini DisplayPort monitor.
The Atlona AT-HD-SC-500 is a scaler with built-in 3×1 switcher for HDMI and VGA signals. It features two HDMI inputs and a VGA input with 3.5mm audio connector. The scaler is designed to take video signals from switchers, PCs or laptops and scale them to an HDMI output at a wide-range of HDTV and PC resolutions, up to 1080p/60Hz and WUXGA (1920×1200).
Please fill in all fields. We will send you an email when this product in stock